As a photographer. Convenience, portability and price are always a concern. Up until the day I found out about Innovatronix. My last power pack which costed me well over $1200 was too expensive and a real pain to have repaired or replaced.
Join the Innovatronix Team - build your career with us!
At Innovatronix, continuous innovation and change are embraced and a good place to build your career. As we are continuously growing, we are looking for talented, creative individuals to be part of our growing team.
TRONIX EXPLORER XT: with new & updated product information
Following the success of the Explorer
1200, Innovatronix Inc is proud to announce its new product the Explorer XT.
Product Features:
The technically superior Explorer XT, rated at 350 watts** continuous power, 1200watts peak power
and recommended up to 2400ws, is designed as a portable power source for most
flash and power pack units. Just like the Explorer 1200, the Explorer XT makes
your studio lights mobile and portable. With the new Explorer XT, it reduces
recycling time for flash units over half, providing more power and better
performance compared to the previous model. (**Now
increased at 350watts)
Equipped with two (2) 12V, 7Ah sealed lead acid batteries, the Explorer XT is designed to be a better
and more reliable portable power supply solution. With loads of up to 2400ws
which the Explorer XT can manageably handle, the Explorer XT is a total
improvement from the Explorer 1200! More digital flash/power packs are expected to be compatible due to its increased power rating.
A pioneer in plug and play portable power solution - it has an auto volt-charging feature which
accepts 100-240V. It also has a 14V car battery charging where an internal
circuit converts the 12V/14V source to a 24V. It also has an auxiliary battery port,
allowing the user to connect another battery in case the stored power is not
sufficient for an all-day photo shoot. Battery power level indicators with
beeper and charging indicators come in handy to monitor the user's power consumption and charging status making the Explorer XT a very user-friendly
power supply.
The Auxiliary Battery Pack is now available as an optional back up power. It
is an external battery pack powered by a two (2) 12V, 12Ah SLA batteries
(compared to two (2) 12V, 7Ah internal/built in batteries), giving
more power for longer photo shoots. For more info on Auxiliary Battery Pack, see
related article below.
Product Performance: Recycle Times and Battery Life
The Tronix Explorer XT is a device which produces a clean 115Vac or 230Vac from a 24V battery from a
fully engineered circuit. It is recommended for most flash units up to 2400Ws.
Note: Flash recycling is a function of three (3) factors: (1) the state of battery
charge; (2) the electronics design of the flash itself; (3) the maximum power
output of the inverter;
**The specifications stated herein are based on worst case
scenarios. Most strobes that are tested when the battery is fully charged.
Refer to compatibility chart of Explorer 1200 here. The
Explorer XT compatibility is larger than the Explorer 1200 list and will be
uploaded soon.
Auxiliary Battery Pack (optional back up battery system for Explorer XT):
The Tronix Auxiliary Battery is specially made
for Tronix Explorer XT. It is recommended for use
as back up power, in case your Tronix Explorer XT
ran out of charge during the photo shoot.
Product Specifications:
Input
100-240Vac or
14Vdc
Output
24Vdc
Dimension
31.5cm x
15.45cm x 17.9cm
Net Weight
10.5 kg
Indicators
LED for charging
status
Battery Set up
(2) 12V,12Ah
SLA batteries
Other Possible Battery Set up
Other battery
combinations (applicable for do-it-yourself battery packs), only Tronix-provided
cord will be needed
![[Download Brochure]](http://www.innovatronix.com/tronixmanuals/ExplorerXTebrochure.jpg){kind=link}
![[Download Compatible Plugs Guide]](http://www.innovatronix.com/tronixmanuals/Accept Plugs.jpg){kind=link}